Installation, connection and initial commissioning
Choose a suitable location
CAUTION!
Risk of injury!
The appliance is heavy and bulky.
Improper handling of the appliance
may lead to injuries.
Seek the help of another person during
■
transport, installation and assembly.
If a trolley is used to move the appli-
■
ance, the appliance must be moved
as shown on the packaging.
Only lift the appliance as shown on
■
the packaging.
Remove all obstacles on the transport
■
route and from the installation loca-
tion, e.g. open doors and clear away
objects lying on the fl oor.
The planned location must fulfil the following
prerequisites:
– The location must be a dry and frost-safe
room with a firm ground.
– In order to install the connection pipes,
the dishwasher must be positioned near to
a washing/dishwashing basin or the floor
drain.
Positioning
You can position the dishwasher in two ways:
– as a freestanding appliance in the room.
The space required for this corresponds to
the appliance measurements cited in the
following diagram.
– built under a worktop. In this case, you must
take the required recess dimensions into
consideration.
Continue with 'Connecting the outlet hose'.
Installation, connection and initial commissioning
1. Remove cardboard, polystyrene and ad-
2. Place the dishwasher in the desired
3. In order to equalise unevenness in the
Appliance measurements
448 mm
hesive strips from the inside of the dish-
washer, if you have not already done so.
position.
floor and set up the dishwasher on a level
horizontal base, you can screw the four
adjustable feet (31) in or out. The adjust-
able feet have slots around their circum-
ference. Insert a screwdriver and turn the
adjustable foot.
Use a spirit level to set up the dishwasher.
Page EN-29
845 mm
600 mm
(31)