Release The Scanner Lock; Connect The Power Cord; Set The Lcd Contrast - Brother DCP-8085DN Quick Setup Manual

4

Release the scanner lock

a
Push the lever
a
unlock the scanner.
(The gray scanner lock lever is located at the
back left side, under the document cover b.)
1
5

Connect the power cord

IMPORTANT
DO NOT connect the interface cable yet.
a
Make sure that the machine power switch is off.
Connect the AC power cord to the machine.
b
Plug the AC power cord into an AC outlet. Turn
the power switch on.
Note
If Scanner Locked appears on the LCD,
immediately release the scanner lock and press
Stop/Exit. (See Release the scanner
lock on page 5.)
in the direction shown to
6
Choose your language
(If needed)
a
Press Menu.
b
Press 1.
c
Press 0.
d
Press
2
language.
Press OK.
e
Press Stop/Exit.
7

Set the LCD contrast

(If needed)
If you are having difficulty reading the LCD, try
changing the contrast setting.
a
Press Menu.
b
Press 1.
c
Press 5.
d
Press
—OR—
Press
Press OK.
e
Press Stop/Exit.
or to choose your
to increase the contrast.
to decrease the contrast.
5