Electrolux ECFI3068AS Use & Care Manual page 20

20
USING THE COOKTOP
3. Press and turn the rear left cooking zone knob
until you reach power level 9 (a long beep will
be emitted).
Now both cooking zone displays shows level 0 and
flashing red dots appear on all displays. The Bridge
function is now activated.
4. You can control both the linked zones using the
front left or rear right cooking zone knobs.
To deactivate the Bridge function, bring both knobs to
the OFF position.
NOTE
This function automatically distributes an equal
amount of power over both the zones involved.
Control Lock
The control lock is a device that protects the appli-
ance from accidental or inappropriate use. Only the
cooktop knobs will be locked.
To activate the Control Lock:
1. Press and hold turn the rear right and front right
cooking zone knobs counterclockwise towards
the position until all the cooking zone dis-
plays show the
will be emitted in the meantime):
To deactivate the Control Lock, follow the instructions
in point 1 until the
IMPORTANT
• After about 10 seconds without interacting with
the cooktop knobs, the cooking zone displays
will be turned off. To check if the Control Lock
is active or not, simply try to turn on any cook-
ing zone.
• When you activate Control Lock, if you turn
and hold the central cooking zone knob for
more than 30 seconds, the flashing symbol
will appear as an error message. Release
the knob to remove it.
symbols (two short beeps
symbol disappears.