Pilz PSEN op2H-A Series Operating Manual page 18

OPERATING MANUAL
The following graphic shows the distance from the interfering devices (D
operating range (D
op
For the purpose of simplification, the table below states the values of the minimum safety
distances required for installation, with reference to some operating ranges.
Operating range
(m)
3
6
10
19
WARNING: The interfering transmitter (TX B) must be positioned at
the same distance D
from the other transmitter TX A is shorter than from the receiver
RX A.
18
) of the pair (TX A – RX A).
Operating range
Minimum safety distance
do
Reichweite
Fig. 12
(m)
0.3
0.4
0.5
0.6
, as calculated above, even if the distance
PSEN op2H-A series
), based on the
do
1003069-EN-03