Minimum Distance From Reflective Surfaces - Pilz PSEN op2H-A Series Operating Manual

OPERATING MANUAL
NO
Fig. 7
2.2.1

Minimum distance from reflective surfaces

Reflective surfaces close to the beams emitted from the protective device (whether from
above, below or from the side) can cause passive reflections. These passive reflections can
adversely affect how the object is detected within the protected area. If the receiver RX
detects a secondary beam (reflected by the side-reflecting surface), the object may not be
detected even if it interrupts the main beam.
When installing the safety light curtain it is important to maintain a minimum distance from
reflective surfaces.
16
DANGER ZONE
Reflective surface
Reflective surface
Fig. 9 Minimum distance from reflective surfaces
PSEN op2H-A series
Fig. 8
1003069-EN-03
YES