Connecting The Power Cord; Installing The Ink Cartridges - Brother DCP-330C Quick Setup Manual

STEP1
Setting Up the Machine
8
While holding the paper tray in place, pull out
the paper support ( ) until it clicks, and then
unfold the paper support flap (
Note
Do not use the paper support flap for Legal paper.
Note
You can use the photo bypass tray is located on
the top of the paper tray to print on photo 4
×
(10 15 cm) and photo L size paper.
For details, see Loading photo paper in Chapter 2
of the User's Guide.
3

Connecting the power cord

1
Connect the power cord.
Improper Setup
DO NOT connect the interface cable.
Connecting the interface cable is done during
the software installation process.
Note
The control panel warning LED will stay on until
you have installed the ink cartridges.
6
4
).
If ink gets in your eyes, wash them out with water
at once, and if irritation occurs consult a doctor.
1
2
×
6 in.
3
Note
Do not throw away the yellow protective part. You
will need it if you transport the machine.

Installing the ink cartridges

Warning
Make sure that the power is turned on.
The LCD shows:
No Cartridge
Black
Yellow
Cyan
Magenta
Open the ink cartridge cover (1).
Pull all the lock release levers down and
remove the yellow protective part (1).
1
1