4 ELECTRICAL CONNECTIONS
Warning. Before making any connections, ensure that the power supply, any high voltage-operated control circuits
and high common mode voltages are switched off.
4.1 Access to Terminals
4.1.1 Wall-/Pipe-mounted Instruments – Fig. 4.1
slide
1
down
4.1.2 Panel-mounted Instruments – Fig. 4.2
Remove nuts and
protection cover
6
Pull out
2
slightly. . .
Fig. 4.1 Access to Terminals – Wall-/Pipe-mounted Instruments
1
Fig. 4.2 Access to Terminals – Panel Mounted Instruments
Remove
protection
cover
4
Slacken
captive
3
screws
2
. . . and
slide off
Mains Cover
Remove
2
mains cover
Earth Studs