Print Quality Check - Brother DCP-110C Quick Setup Manual

• DO NOT remove ink cartridges if
you do not need to replace them.
If you do so, it may reduce the ink
quantity and the machine will not
know the quantity of ink left in
the cartridge.
• DO NOT shake the ink cartridges.
If ink stains your body or
clothing, wash with soap or
detergent immediately.
• DO NOT dismantle or tamper
with the ink cartridge, this can
cause the ink to leak out of the
cartridge.
• Brother strongly recommends
that you do not refill the ink
cartridges provided with your
machine. We also strongly
recommend that you continue to
use only Genuine Brother Brand
replacement ink cartidges. Using
or attempting to use potentially
incompatible inks and/or
cartridges in your machine may
cause damage to the machine
itself and/or it may result in
unsatisfactory print quality. Our
warranty coverage does not
apply to any problem that was
casued by the use of
unauthorized third party ink and/
or cartridges. To protect your
investment and guarantee your
print quality please continue to
replace consumed ink cartridges
with only Genuin Brother Brand
Supplies.
• DO NOT insert and remove the
cartridges repeatedly. If you do
so, the ink may seep out of the
cartridge.
■ If you mix the colors by installing an ink
cartridge in the wrong position, you must
clean the print head by running several
cleaning cycles after correcting the
cartridge installation. (See "Cleaning the
print head" in chapter 5 Troubleshooting
and Routine Maintenance of the User's
Guide.)
■ Once you open an ink cartridge, install it in
the machine and use it up within six
months of installation. Use unopened ink
cartridges by the expiration date written
on the cartridge package.

Print Quality Check

5
1
After the cleaning cycle is finished, the LCD
shows:
Set Paper and
Press Start
2
Make sure the paper is loaded in the paper
tray.
Press Color Start.
3
The machine starts printing the PRINT
QUALITY CHECK SHEET (only during
initial ink cartridge installation).
Print Quality Check
1. Check the quality of the four-color blocks formed by the short lines.
2. If all the short lines are clear and visible, the quality is acceptable. the quality is acceptable.
Select (Yes). If you can see missing short lines, select (No) to begin the color cleaning process
and follow the prompts on the LCD.
Avoid touching the printed surface
of the paper immediately after
printing, the surface may not be
completely dry and may stain your
fingers.
4
The LCD shows:
Is Quality OK?
▲ Yes ▼ No
Check the quality of the four color blocks
formed by the short lines printed on the
sheet.
(BLACK/ CYAN/ YELLOW/ MAGENTA)
Continued...
7