Brother DCP-110C Quick Setup Manual page 20

Step 2
3. Carefully route the USB cable through
the trench and out the back of the
machine as shown below.
Warning
Ensure that the cable does not restrict the cover from
closing, or an error may occur.
DO NOT connect the machine to a
USB port on a keyboard or a non
powered USB hub.
8
Lift the scanner cover to release the lock.
Gently push the scanner cover support
down and close the scanner cover.
9
Turn on the machine by plugging in the
power cord.
0
If the Deviceselector window is open,
select USB, and then click OK.
18
Installing the Driver & Software
A
Select Applications from the Go menu.
B
Open the Utilities folder.
C
Open the Print Center icon.
D
Click Add.