FP postbase vision Quick Reference Manual page 2

Turning PostBase Vision on / off
ON: Briefly press the
ON / OFF button.
Wake up from standby:
Touch display or briefly press
the ON / OFF button.
OFF: Press the ON / OFF
button for 3 seconds.
Franking
Prior to franking ...
– Postage set, letter weighed?
– Other settings for franking
as desired?
– Sufficient postage available?
– Correct account set?
– Reset item counter?
Position a letter
Letter guide face
(hand feed tray)
To position the letter on the
hand feed tray:
– side to be printed face up
(address field is visible)
– the top edge must touch
the letter guide face.
PostBase Vision recognises
the letter, feeds it and franks it.
Position a letter stack
Pendulum
(PostBase Vision Feeder)
Ramp
Position the prepared letter
stack on the ramp (side to be
printed face up).
Lower the pendulum onto
the letter stack.
PostBase Vision feeds the
letters one by one and franks
them.
Franking labels
Inserting labels
Unfold label compartment:
Press on the knurled surface.
Remove package band from
the package of labels.
Insert:
– the side to be printed on
faces up
– insert the labels in direction
of the imprinted arrow as
far as they will go.
Franking labels
Set the franking imprint.
Set number Displays number of
labels yet to be printed
Printed Postage Impression (optional)
Setting the imprint:
Franking DX products (optional)
DX license code
DX product price in Pence
Date
Setting the DX imprint:
Displaying DX information:
Selected menu functions
Frank the set
number of labels
Select DX product
Load postage into your machine, print receipt
Display / print certain parameters and information on
used postage
Change, clean ink cartridge, show ink level, test print
Use special features, e.g. print only advert / text,
print numbers, incoming mail stamp
Enter, edit, delete text
Synchronise PostBase Vision with the data centre, upload
postal data, load updates, send diagnostics data to the
service, show status (last successful synchronisation)
Set date for the franking imprint (pre-date)
Show number of franking imprints
Reset piece counter to zero
Set the internal scale's weighing mode, differential
weighing: weigh mail pieces upon removing them from
the stack (optional)
Display usage data (number, postage usage per account),
print report (optional), reset counter to zero
Rename, delete shortcuts, reset to factory settings
Configure network settings (LAN, Wi-Fi) for connecting
to the data centre
Set tone signals (profile)
Customise the colour of the menu bar
Show important system parameters (machine ID, software
version, rate table, equipment etc.)