Launch CNC-602A User Manual page 2

LAUNCH
Keep hair, clothes, fingers or the other body parts
away from the running parts of the unit.
In order to avoid electric shock, keep away from the
damp part of a working unit and avoid exposing it to
the rain.
Please operate the unit according to the operation
procedures in the manual. Only use the accessories
recommended by the manufacturer.
Do not switch on the ultrasonic system when there
is no ultrasonic detergent in the ultrasonic cleaning
chamber. Otherwise, damage to the ultrasonic
cleaner can be resulted.
Keep the unit well grounded.
Provide ventilation through an exhaust gas removal
system, ventilation fans or large doors. Carbon
monoxide gas, which is odorless and colorless, can
cause serious illness, injury or death.
Avoid contacting hot surfaces such as exhaust
pipes, radiator, etc.
Before testing vehicles, put the transmission lever in
NEUTRAL position, apply the parking brake, and
block the front wheels.
ALWAYS WEAR SAFETY GOGGLES. Common
used glasses are NOT safety glasses.
When disconnecting any connector of the
pressurized fuel hose, wrap the connector with
towel to prevent the fuel from spurting out. Spurted
fuel may cause personal injury or fire.
Test liquid is used by the main unit. Detergent is
used for on-vehicle cleaning. The ultrasonic
cleaning uses specified ultrasonic detergent (It can
be replaced by detergent provided together with the
unit).
Note: Specifying operations that require attention
when operating the equipment.
Warning: Specifying a possible hazard that could
result in damage to the machine or personal injury.
PLEASE SAVE THESE
INSTRUCTIONS
Injector Cleaner & Tester User's Manual
ii