Table of Contents
Advertisement
RP-STE-Squelch Tail
36
Elimination
RPT-RL - Delay the
37
squelch tail of repeater
PONMSG-Power On
38
Message
ROGER - Roger Beep
39
RESET – Restore defaults
40
R-TONE–Repeater
41
Tone
MENU+36
MENU+37
MENU+38
MENU+39
MENU+40
MENU+41
40
Reception of a 55 Hz or 134.4 Hz tone burst
mutes the audio long enough to prevent
hearing any squelch tail noise.
OFF/ 1,2,3...10
*This function is used eliminate squelch tail
noise when communicating through a repeater.
OFF/ 1,2,3...10
*Delay the Tail Tone of Repeater (X100
milliseconds)
FULL: Performs an LCD screen test at power-on
MSG : Displays a 2-line power on message
*Controls the behavior of the display when the
transceiver is turned on.
OFF
*Sends an end-of-transmission tone to indicate
to other stations that the transmission has
ended.
VFO: Menu initialization
ALL: Menu and channel initialization
*Resets the radio to factory defaults, with
some exceptions.
1000Hz/1450Hz/1750Hz/2100Hz
*To send out a repeater tone; You hold down
the [PTT] + [SOS] key.
ON
Hide quick links:
Advertisement
Table of Contents
