Table of Contents
Advertisement
2.6 How to Store the Battery
a. If the battery needs to be stored, keep it in status of 80% discharged.
b. It should be kept in low temperature and dry environment.
c. Keep it away from hot places and direct sunlight.
» Do not short circuit the battery terminals.
» Never attempt to remove the casing from the battery pack.
» Never store the battery in unsafe surroundings, as a short may cause an explosion.
» Do not put the battery in a hot environment or throw it into a fire, as it may cause an explosion.
Chapter3. Installation of Accessories
Before the radio is ready for use we need to attach the antenna and battery pack, as well as charge the battery.
3.1 Installing/ Removing the Antenna
a. Installing the Antenna: Screw the antenna into the connector on the top of the
transceiver by holding the antenna at its base and turning it clockwise until secure.
b. Removing the Antenna: Turn the antenna counter-clockwise to remove it.
3.2 Installing the belt clip
a. Install the fixing head: Install the random belt clip fixing head in the slot on the back
of the two-way radio and tighten the screws.
b. Insert the rotating belt clip: Slide the fixed head of the machine along the guide of
the rotating back clip until you hear a "click" sound.
c. Remove the belt clip: Use the key to press the disassembly engine upwards until it
8
Hide quick links:
Advertisement
Table of Contents
