Table of Contents
Advertisement
BCL – Busy Channel
23
Lock-out
AUTOLK –Automatic
24
Keypad Lock
SFT-D – Frequency
25
Offset Direction
OFFSET -Frequency shift
26
amount
MEM-CH - Store a
27
Memory Channel
DEL-CH - Delete a
28
memory channel
MENU+23
MENU+24
MENU+25
MENU+26
MENU+27
MENU+28
38
OFF
ON
*Disables the [PTT] button on a channel that is
already in use. The transceiver will sound a
beep tone and will not transmit if the [PTT]
button is pressed when a channel is already in
use.
OFF
ON
*When ON, the keypad will be locked if not
used in 8 seconds. Pressing the [#
seconds will unlock the keypad.
OFF: TX = RX (simplex)
+: TX will be shifted higher in frequency than RX
- : TX will be shifted lower in frequency than RX
00.000...69.990
*Specifies the difference between the TX and
RX frequencies
000...127
*This menu is used to either create new or
modify existing channels (0 through 127) so
that they can be accessed from
MR/Channel Mode
000...127
*This menu is used to delete the programmed
information from the specified channel (0
through 127) so that it can either be
programmed again or be left empty.
] key for 2
Hide quick links:
Advertisement
Table of Contents
