Baofeng UV-9G User Manual page 40

S-CODE - Signal Code
17
SC-REV - Scanner
18
Resume Method
PTT-ID - PTT-ID
19
PTT-LT – PTT ID delay
20
MDF-A - Channel A
21
Display Mode
MDF-B - Channel B
22
Display Mode
MENU+17
MENU+18
MENU+19
MENU+20
MENU+21
MENU+22
37
1,...,15
TO : Time Operation - scanning will resume after
a fixed time has
passed
CO : Carrier Operation -scanning will resume
after the signal disappears
SE : Search Operation -scanning will not resume
OFF: No ID is sent
BOT: The selected S-CODE is sent at the
beginning
EOT: The selected S-CODE is sent at the ending
BOTH : The selected S-CODE is sent at the
beginning and ending
0,1,2...,50ms
*PTT-ID Delay (milliseconds)
FREQ: Displays programmed Frequency
CH: Displays the channel number
NAME: Displays the channel name
*Note: Names must be entered using software.
FREQ: Displays programmed Frequency
CH: Displays the channel number
NAME: Displays the channel name
*Note: Names must be entered using software.