Baofeng UV-9G User Manual page 34

With this function you have the confirmation that the repeater has transferred the signal. You can choose amongst: OFF
1,2,3,4,5,....10 to set the delay time.
(38) Display mode at the turning on (PONMSG) Menu No.38
With this function you can set the display mode when the radio is turned on. Available options:
• FULL: full frequency character is displayed.
• MSG: UV-9G is displayed.
(39) Roger beep (ROGER) - Menu No. 39
When the PTT is released, the radio will beep to confirm to other users that you have finished your transmission and that
they can start talking.
(40) Reset (RESET) - Menu No.40
With this function you can reset the transceiver to the factory-programmed settings and parameters. After that, you can set
the desired functions.
There are two types of reset:
• VFO: Menu Reset • ALL: Menu and channel Reset
(41) 1000Hz, 1450Hz, 1750Hz, 2100Hz Repeater Tone (R-TONE) - Menu No.41
With this function you can select 1000Hz, 1450Hz, 1750Hz, 2100Hz repeater tone. To send out a repeater tone; You hold
down the [PTT] + [SOS] key.
If you have the keypad lock enabled on your radio, you can still send a 1750Hz tone the regular way without having to unlock
your radio.
31