On Hook Dialling - Brother FAX-8360P Owner's Manual

One Touch Dialling
1
Pick up the external telephone's handset.
2
When you hear a dial tone, press the One Touch Dial key of the location you want to call. To
use One Touch dial numbers 17-32, hold down Shift and press the appropriate One Touch Dial
key.
3
To hang up, replace the external telephone's handset.
If you try to use a One Touch location with no number stored in it, you hear a
warning sound, and screen displays NOT ASSIGNED. The display returns to
normal after 2 seconds.
Speed Dialling
1
Pick up the external telephone's handset.
2
When you hear a dial tone, press Search/Speed Dial, then press # and the three-digit Speed
Dial number. (See Storing Speed Dial Numbers, page 19.)
3
To hang up, replace the external telephone's handset.

On Hook Dialling

1
Dial the number by using One Touch, Speed Dial, Search or dial pad.
2
The number you are dialling, or the name you have stored for One Touch or Speed Dial is
displayed on the LCD.
3
Press Fax Start.
4
Pick up the external telephone's handset and press Tel when you hear the caller at other end
from the monitor speaker.
When you make a call by pressing Fax Start after dialling, you can listen to the
other end of the line from the monitor speaker, but they can't hear you unless you
pick up the external telephone's handset.
If you accidentally press Tel before lifting the external telephone's handset, the call will be
disconnected.
Telephone (Voice) Operation
31