Custom Settings - Brother FAX-8360P Owner's Manual

Custom Settings

Volume Settings
Ring Volume
You can select how loud, the machine rings. The ring volume can be turned off for silent reception
if required.
1
Press Menu, 1, 3, 1.
2
Press or to select OFF, LOW, MED, or HIGH.
3
Press Set when the screen displays your selection.
4
Press Stop/Exit.
—OR—
You can adjust the ring volume when the machine is idle. You can turn the ring OFF.
Press High or Low to adjust the volume level. With each key press, the machine rings so you can
hear the current setting and the display shows the setting you are choosing. Each key press changes
the volume to the next setting.
The new setting will remain until you change it again.
Beeper Volume
You can set the beeper to LOW, HIGH or OFF. The machine comes with this volume set to LOW.
When the beeper is set to LOW or HIGH, the machine beeps every time you press a key or make
an error, and at the end of sending or receiving a fax.
1
Press Menu, 1, 3, 2.
2
Press or to select your setting.
3
When the screen displays the setting you want, press Set.
4
Press Stop/Exit.
Speaker Volume
You can set the volume of the machine speaker.
1
Press Menu, 1, 3, 3.
2
Press or to select your volume setting (OFF, LOW, MED, or HIGH).
3
Press Set when the screen displays your selection.
4
Press Stop/Exit.
15
Setup