Troubleshooting; Technical Specifications - Bushnell EQUINOX X650 Owner's Manual

TROUBLESHOOTING

Unit does not turn on
1. Reinstall the batteries, making sure of the correct polarity (+/- terminals) orientation (refer to "Batteries Installed"
photo on the Parts and Controls Guide page).
2. Replace all batteries.
3. Clean the battery compartment, especially the contact points.
Image is blurry
1. Re-focus by adjusting the Main Focus Ring (F).
2. Adjust the diopter setting if necessary by rotating the Eyepiece (J) until the display icons appear sharp.
3. Check the condition of the objective lens surface and eyepiece and clean if necessary.
4. In low light conditions, make sure you are in Night mode and activate the IR Illumination.
Image disappears or its quality is reduced
Bright light sources (e. g. street lights at night time) may cause decreased visibility or reduced contrast.
• Turn the unit away from the light source; visibility will return momentarily.
Image at night is black and white
Viewed or recorded images at night appear black & white with no colors.
• This is normal, colors cannot be reproduced under dim conditions using IR illumination as the main source of light.

TECHNICAL SPECIFICATIONS

Specification
Magnification (optical)
Max. Magnification (via digital zoom)
Objective Size
Battery Type
IR Illuminator Power/Wavelength
IR Iluminator Beam Width Angle
Max. Viewing Distance *
Field of View (degrees)
Field of View (ft@100yds)
Dimensions (H x W x L)
Weight
Tripod Mountable
Water Resistance Standard
* In night mode, distance range is subjective and varies with subject viewed, ambient light intensity and other factors.
EX650
5x
9x
32mm
4x AA, lithium, alkaline or NiMh
1W / 850nm
5 degrees
216 yds / 197 m
7.29
23.2' x 17.4'
69 x 85 x 190 mm
11.6 oz / 330 g
Yes
IPX4
7