Troubleshooting Tips - Bushnell CORE DS-4K Instruction Manual

TROUBLESHOOTING TIPS

1) Camera won't power on.
Possible Cause
Batteries not fully installed, or not installed correctly.
Recommended Solution(s)
• Install new AA alkaline or Bushnell recommended
Energizer® Lithium AA batteries.
• Make sure the positive (+) and negative (–) poles are
lined up properly in each compartment, with (–) pole
making contact with the spring.
2) Camera takes images without animals.
Possible Cause
A "false trigger" caused by motion (branches, water, etc.)
and/or high heat in front of the camera lens when there is no
subject in the image.
Recommended Solution(s)
• Move camera to spot without branches or water close to
camera.
• Change sensor level in menu settings.
• Move camera to inside area without movement to check
and see if it still takes pictures without movement.
Contact customer service for possible repair or
replacement.
3) Camera responds slowly to movement, does not
always capture image when triggered.
Possible Cause
PIR sensitivity setting needs to be adjusted.
20