Advertisement
Advertisement
Table of Contents
Related Manuals for Bushnell EQUINOX X650
Summary of Contents for Bushnell EQUINOX X650
- Page 1 EQUINOX X650 ™ DIGITAL NIGHT VISION OWNER’S GUIDE Model #: EX650...
- Page 3 ENGLISH PARTS AND CONTROLS GUIDE A. Battery Compartment Cover K. Zoom In B. USB Port/Video Out/Micro-SD Card Zoom Out Eyepiece w/Diopter M. Mode Button D. Objective Lens N. On/Off, Play, Record & Capture Button Lens Cap/Filter Main Focus Ring G. Infrared (IR) Illuminator H.
-
Page 4: Battery And Sd Card Installation
X650 has no internal memory and will not capture photos and/or videos unless a card is inserted. • If you will only be using Equinox X650 for “live” viewing and do not wish to use it for photos/videos, the unit will function normally without a card. - Page 5 DISPLAY ICONS AND INDICATORS (“HUD”) After powering on the Equinox X650, multiple icons and text will be visible at the top and bottom of the display as viewed through the eyepiece. These overlaid icons and text are referred to as the “HUD” (heads up display). Pressing Select will enter the Settings Menu, which is described in the next section.
- Page 6 IR illuminator settings, etc. After about 5 seconds, the display will return to the normal view, with no visible icons. The Settings Menu will allow you to optimize the Equinox X650 for the way you plan to use it, and to your personal preferences by selecting an option and then changing its setting.
-
Page 7: Care And Maintenance
STATIONARY, NEVER WHEN IN MOTION. CARE AND MAINTENANCE Your Bushnell Equinox X650 was designed to provide many years of reliable service. To ensure that you get the most enjoyment out of your digital night vision device, follow these recommendations, guidelines and precautions: Keep the device away from any heating and air conditioning vents or other heating devices, direct sunlight, and... -
Page 8: Troubleshooting
TROUBLESHOOTING Unit does not turn on 1. Reinstall the batteries, making sure of the correct polarity (+/- terminals) orientation (refer to “Batteries Installed” photo on the Parts and Controls Guide page). 2. Replace all batteries. 3. Clean the battery compartment, especially the contact points. Image is blurry 1. - Page 9 Products manufactured on or after June 2020 are covered by the Bushnell Ironclad Warranty. The Ironclad Warranty is a full lifetime warranty that covers the lifetime of this Product. Each Product has a defined lifetime; lifetimes can range from 1 to 30 years. This Product’s lifetime can be found at the website listed below and/or on the Bushnell webpage specific to this Product.
-
Page 10: Fcc Statement
FCC Statement This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. - Page 12 ©2019 Bushnell Outdoor Products Bushnell,™, ®, denote trademarks of Bushnell Outdoor Products www.bushnell.com 9200 Cody, Overland Park, KS 66214...
Need help?
Do you have a question about the EQUINOX X650 and is the answer not in the manual?
Questions and answers
It turns on reads BUSHNELL...AND STAYS ON THAT..HAVE TO REMOVE BATTERIES TO EVEN TURN OFF
@Dale R.Ross long press the power button