Advanced Receiving Operations
Operation from Extension Telephone (For FAX 4750, MFC
8300, MFC 8600 and MFC 8700 only) or External Telephone
If you answer a fax call on an extension phone (or on an external phone in
the EXT. jack), you can make your machine take over by using the Fax
Receive Code. When you press the Fax Receive Code
, the
1
5
machine starts to receive a fax. (See Setting Ring Delay, page 5-2 and
Easy Receive, page 5-3.)
If the machine answers a voice call and double-rings for you to take over,
use the Telephone Answer Code
to take the call at an extension
1
5
phone.
If you answer a call, and no one is on the line, assume you're receiving a
fax. At the machine's phone, press
, then hang up. At an extension
Start
phone, press
, wait for fax receiving tones (chirps), then hang up.
1
5
At an external phone, press
and wait for the phone to be
1
5
disconnected (the screen displays RECEIVING) before you hang up.
(Your caller will have to press
to send the fax.)
Start
For the FAX 5750, the Fax Receive Code and Telephone Answer Code can
be used only from an external phone.
For FAX/TEL Mode Only
When the machine is in FAX/TEL mode, it will use the F/T Ring Time
(double-ringing) to alert you to pick up a voice call. If you're at the
machine, you can lift the handset to answer.
If you're at an extension phone, you'll need to lift the handset during the
F/T Ring Time and press
between the double rings. If no one is
1
5
on the line, or if someone wants to send you a fax, send the call back to
the machine by pressing
.
1
5
Changing Remote Codes
Remote Codes might not work with some telephone systems. The preset
Fax Receive Code is
. The preset Telephone Answer Code is
5
1
.
1
5
If you are always disconnected when accessing your external TAD
remotely, try changing the Fax Receive Code from
to
1
5
and the Telephone Answer Code from
to
.
5
1
9
9
9
S E T U P
R E C E I V E
5 - 7