Setting Volume Amplify; Setting The Speaker Volume; Setting The Ring Volume; Memory Storage - Brother FAX 4750 Operation Manual

Setting Volume Amplify

Please carefully read "Choosing the Handset Volume," page 4-4 before
you do the following steps:
1
For the FAX, press
For the MFC, press
2
If none of the users are
hearing-impaired, press
to select VOL AMPLIFY:OFF?
and press , then go to Step 4
Set
—OR—
If some or all of the users
are hearing-impaired, select
VOL AMPLIFY:ON? and press
3
If all the users are hearing-impaired,
press or to select PERMANENT?
and press
Set
—OR—
If only some of the
users are hearing-impaired, select
TEMPORARY? and press
4
Press to exit.
Stop

Setting the Speaker Volume

You can adjust the speaker volume when your machine is on
Press Volume
setting you are choosing. Each key press changes the volume to the next
setting. The new setting will remain until you change it again.

Setting the Ring Volume

You can adjust the ring volume when your machine is idle. You can turn
the ring OFF or you can select a ring volume level.
Press Volume
machine rings as you hear the current setting and the display shows the
setting you are choosing. Each key press changes the volume to the next
setting. The new setting will remain until you change it again.

Memory Storage

In the event of a power failure, all settings in the INITIAL SETUP,
SETUP RECEIVE, SET AUTO DIAL and REMOTE FAX OPTIONS, plus
the COVERPG SETUP and COVERPG MSG (from SETUP SEND)
functions are stored permanently. You may have to reset the date and time.
, , .
Function
7
1
, , ,
Function
1 1 7
or
Set
.
Set
or to adjust the volume level. The display shows the
or to adjust the volume level. With each key press, the
.
VOL AMPLIFY:ON?
SELECT < - - > & SET
.
PERMANENT?
SELECT < - - > & SET
TEMPORARY?
SELECT < - - > & SET
I N I T I A L
.
Hook
S E T U P 4 - 5