Installing Brother Printer Driver
(For Parallel Interface)
(For Windows
Version 4.0 Only)
1
Insert the Brother CD-ROM into your CD-ROM drive.
2
Enter the command for your version of Windows
After you insert the Brother CD-ROM, you must type the appropriate
command for your version of Windows
If you are using Windows
4.0, the Software Installation program appears automatically when you
insert the Brother CD-ROM.
—OR—
You can also click Start at the Desktop, select Run and then enter
x:\SETUP.EXE. ("x" is the drive letter for your CD-ROM drive.)
If you are using Windows
Insert the Brother CD-ROM for the MFC 8300 printer driver into your
CD-ROM drive.
From the Program Manager, click on File, then Run.
Enter x:\SETUP. ("x" is the drive letter for your CD-ROM drive.)
The Brother LOGO will be displayed on the screen.
If you are using Windows NT
will appear on the screen:
You are running Windows NT
support this version of Windows NT
WINDOWS NT 4.0 AND REINSTALL MFL Pro!!
If you are using Windows NT
as the Administrator, an error message will appear explaining the problem.
12 - 10
S E T U P
®
95/98 and Windows NT
®
95/98 or Windows NT
®
3.1x:
®
3.51 or earlier, the following error message
®
3.51 or earlier. Brother MFL Pro does not
®
Workstation 4.0 and you are not logged-in
B R O T H E R
M A C H I N E
®
Workstation
®
, if needed.
®
:
®
Workstation Version
®
. YOU MUST UPGRADE TO
W I T H
P C