Table of Contents
Advertisement
Microsoft Windows NT Provides built in support for 255 standard serial ports.
To setup your PCI RS422/485 serial card you should follow these steps. Please
note that to change any kind of hardware configuration under Windows NT you
must be logged in as a user with Administrator level privileges, if you do not
have these please contact your system administrator.
Insert the PCIQuad Velocity RS422/485 into your PC, as described in chapter 2,
and restart. Place the supplied CDROM titled "Serial Solutions Software" in a
suitable drive and from the Start Menu choose Run
Enter <drive>:\diskimg\ssnt\setup (where <drive>: is the path to the
CDROM drive containing the installation disk).
InstallShield will then install the driver software automatically - it will then copy
the necessary files and start itself. This automatically detects your new PCI serial
card(s) and does not require any further system restarting.
•
Advertisement
Table of Contents
Need help?
Do you have a question about the CC-346 and is the answer not in the manual?