Table of Contents
Advertisement
Now replace the system unit's cover by carefully sliding it down and over the
system unit. Replace the cover screws.
After attaching all the monitor and keyboard cables, power up the PC. Do not
forget the mains power cable!
The PC should power on in the normal way.
If the system fails to power up normally check the following:
Ensure that the PC Serial card is installed correctly.
nsure that other cards in the PC have not been upset.
Ensure that the power is connected and the PC is switched ON!
If all these have been checked and the PC still does not power up then inspect
the area surrounding the card to ensure that any potentially harmful bits of metal
etc. are not present, if the problem persists ask your dealer to check the card or
contact help@brainboxes.com
•
Advertisement
Table of Contents
Need help?
Do you have a question about the CC-346 and is the answer not in the manual?