Hunter ICC Series Product Information page 9

Intuitive Dial Programming
For easy program entry
For contractors and homeowners alike, the
ICC provides step by step programming.
No complicated entry functions or repetitive
keystrokes. Just turn the dial to the section
of the program that needs to be changed and
use the plus, minus and next buttons to make
the adjustments. No other programming
method is easier.
Multi-language Capability
User friendly in all parts of the world
The ICC line is available as a multi-language
controller family. Separate customization
kits are available in Spanish (INT-321),
French (INT-322), Italian (INT-323), and
German (INT-370). These kits include an
ownerʼs operation manual, door instruction
card and a faceplate overlay that replaces the
English version included with the controller.
Semi-Automatic Operation
Quick manual watering of all stations
Simply turn the dial to "Manual-All Stations"
and choose either a program or a specific
station within that program to start irrigating.
Then turn the dial back to "Run," and the
ICC runs through the remaining stations.
Station run times can be changed during
semi-automatic operation to create a custom
manual program. After the controller com-
pletes the manual watering, it will return to
the original schedule.
Single Station Manual Start
If all that is needed is a little extra
on a single zone
Many times throughout the year and for
many reasons (e.g., watering fertilizer or
pesticides into the soil, spot seeding),
the user will want to add extra water to a
particular zone. With single station manual
start, the ICC is able to accomplish that task.
ICC Controller
Just turn the dial to Manual-Single Station,
use the arrow button to move to the desired
station, then turn the dial to the Run posi-
tion. The user may also increase or decrease
the run time setting if preferred. After the
zone is finished, the controller will return to
automatic mode with its original schedule,
even if modified for the manual operation.
Remote Ready
Provide your controller
with simple and reliable
operation away from its
mounting location
The ICC is remote ready!
A SmartPort
ness is supplied with the
ICC controller to permit
the attachment of a Hunter SRR or ICR
remote receiver. The easy-to-install handy
option can help save time and effort by
allowing remote valve operation away
from the controller. The receiver and trans-
mitter can be used on several jobs by simply
installing a wiring harness at each controller;
the receiver can be unplugged at one site
and plugged into a wiring harness at another
ICC site.
Optional pedestal allows free-standing installations.
wire har-
®
7