Hunter ICC Series Product Information page 5

One Touch Manual Start and Rapid Advance
Simple operation for a quick check of zones
The One Touch Start and Rapid Manual
Advance feature increases user-friendliness
of the controller by using fewer steps to
activate stations. This feature is great for a
quick cycle when extra watering is needed
or if you would like to scroll through the
stations to inspect the system.
Cycle and Soak Capability
For maximum programming flexibility
In addition to all of the other programming
features, the ICC also has a cycle and soak
feature which is perfect for bringing up new
seed or when watering slopes or landscapes
with clay soils. Program how long you
want the station to run and the minimum
amount of time you want to allow the water
to soak in, and the ICC divides up the run
time automatically.
Seasonal Adjust
Compensates for weather changes
The simple-to-use global seasonal adjust
compensates for weather changes–adjust
the station run times from 10% to 150% (in
10% increments) without reprogramming.
The easy-to-read adjusted level is always
immediately apparent with the thermometer
type display.
Choice of Independent Day
Scheduling Options
Days of the week or 31-day interval for
maximum flexibility
The watering day schedules in programs A,
B or C may be set up independently from
each other. In each program, the choice of
Custom (day of the week), Interval (up to
31-days), Odd or Even days may be selected.
This allows the user to water on certain days
of the week such as Monday, Wednesday
ICC Controller
and Friday or water on a repeating day cycle
(Interval) such as every third day, or odd/
even days in any or all three of the programs.
3 Programs (A, B, C) with
Multiple Start Times
Different watering requirements are met
with independent programming
The ICC allows for many different irrigation
applications using three completely inde-
pendent programs. This is ideal for various
types of plants that have separate watering
day requirements. Each program has the
ability to water up to four start times per
day. The user has complete flexibility with
watering schedules for new seed or sod
lawns, multiple cycles for low infiltration-rate
soils, slopes, morning or evening irrigation
and other watering window restrictions.
Concurrent Station Operation with
Program D
Run two stations at once
The A, B, and C programs will stack start
times, while program D will run concur-
rently with all other programs. This program
D feature is great for large projects with drip
systems. Generally, the watering window on
large projects is limited, while the length
of necessary watering time is high. The
GPM requirements are usually low on drip
watering systems; the ICC will permit this
low volume watering to run concurrently
with other programs, allowing the project to
complete watering in less time. The ICC has
the capability of running up to two valves
3