Hunter ICC Series Product Information page 23

Irrigation Management and Monitoring System
Cycle and Soak Optimizes Watering
Run Times
Keep runoff to a minimum when using a
Hunter ICC irrigation controller
In addition to other programming features,
IMMS simplifies use of the Cycle and
™
Soak feature in all ICCs. Cycle and Soak
programming is the preferred way to water
slopes, heavy soils or any area that cannot
allow a runoff situation. The Cycle and Soak
feature works by programming the total
amount of run time needed for the zone,
then selecting a maximum cycle time and
a minimum soak time. The ICC Controller
does the rest, breaking up the total run time
into a number of cycle times with a soak
time countdown between each cycle time.
With IMMS, each station is easily set to its
own optimum Cycle and Soak settings...and
the effects of each change are immediately
calculated and displayed.
Operates in Windows 2000 or XP
®
Takes advantage of latest computer technology
Using the newest popular computer
technology makes sense when coupled
with a sophisticated irrigation management
tool. With all of the features available in
the IMMS package, Windows 2000 or XP
provides the best choice to ensure its "behind
the scenes" technology will run without
hindrance.
Historical Logs Keep System
Operating Data for Later Use
Stores important information to solve issues
The IMMS control system will store sched-
ule and alarm histories for later analysis.
This includes information associated with
station start and stop times, sensor and alarm
data, etc.
™
21