Light Bulb Replacement - Dimplex Contempra KDS6401E Parts & Service Manual

KDS6401E
If unit was operating prior to servicing allow at least 10 minutes for light bulbs and
heating element to cool off to avoid accidental burning of skin.
Disconnect power before attempting any maintenance or cleaning to reduce the risk of
electric shock or damage to persons.
Light bulbs need to be replaced when you notice a dark section of the flame. There are
two bulbs under the log set which generate the flames and embers.
It is a good idea to replace all of the light bulbs at one time if they are close to the end of
their rated life. Group replacement will reduce the number of times you need to open
the unit to replace the light bulbs.

LIGHT BULB REPLACEMENT

1. On the back of the Contempra remove the screws from the light access cover.
2. Remove the light access cover.
3. Reach into the opening, locate and examine the bulbs to determine which bulb(s)
require replacement.
4. Unscrew the bulb(s).
5. Insert new bulb(s).
6. Install the light access cover and install the screws
BULB REQUIREMENTS
Quantity of 2 clear chandelier or candelabra bulbs with an E-12 (small) socket base, 60
watt rating. Example GE 60BC of Philips 60 CTC.
9