MG ZS11 Owner's Handbook Manual page 271

5 Remove bulb holder and remove bulb.
6 Fit new bulb to bulb holder.
7 Insert bulb holder in lamp assembly, rotate clockwise
until fully secure.
8 Refit the wiring connector.
9 Fit the rear bumper cover.
10 Reconnect battery negative terminal.
11 Test lamp operation.
EMERGENCY INFORMATION
Rear Direction Indicator Bulb Renewal
1 Open the tailgate.
2 Disconnect the battery negative terminal.
3 Using a suitable pry bar or lever, carefully release and
remove the securing screw cover trim.
4 Using a suitable spanner/socket wrench, remove the 2
screws securing the lamp to the body.
5
255