MG ZS11 Owner's Handbook Manual page 268

EMERGENCY INFORMATION
5 Locate the bulb in the lamp, rotate clockwise until fully
secured.
6 Refit the wiring connector to the new bulb.
7 Fit the front bumper cover.
8 Connect the negative battery terminal.
9 Test lamp operation.
252
Reverse Lamps Bulb Renewal
1 Open the tailgate.
2 Disconnect the battery negative terminal.
3 Using a suitable pry bar or lever, carefully remove the
cover trim.
4 Using a suitable spanner/socket wrench, remove the 3
screws (1) securing the lamp to the tailgate. Remove
the wiring connector (2). Release the lamp assembly
and remove away from the body.