Renishaw SPA1 Installation Manual page 4

Care of equipment
2
Care of equipment
Renishaw probes and associated systems are precision tools used for obtaining precise measurements
and must therefore be treated with care.
Changes to Renishaw products
Renishaw reserves the right to improve, change or modify its hardware or software without incurring any
obligations to make changes to Renishaw equipment previously sold.
Warranty
Renishaw plc warrants its equipment for a limited period (as set out in our Standard Terms and Conditions
of Sale) provided that it is installed exactly as defined in associated Renishaw documentation.
Prior consent must be obtained from Renishaw if non-Renishaw equipment (e.g. interfaces and/or cabling)
is to be used or substituted. Failure to comply with this will invalidate the Renishaw warranty.
Claims under warranty must be made from authorised service centres only, which may be advised by the
supplier or distributor.
Trademarks
Windows 98, Windows XP, Windows 2000 and Windows NT are registered tradenames of the Microsoft
Corporation.
All trademarks and tradenames are acknowledged.
References and associated documents
It is recommended that the following documentation is referenced to when installing the UCC.
Renishaw documents
Documentation supplied on Renishaw UCC software CD.
Document number
H-1000-5057 UCC controller programmer's guide
H-1000-5058 UCC Renicis user's guide
H-1000-5223 UCC2 installation guide
H-1000-5068 SPA1 installation guide
Title