abc Storage Cabinet Manual page 9

Step 5
First, fi ll the holes in the LEG (I) 1/4 to 1/2 full with GLUE (54M). Then, insert
å
two WOOD DOWELS (15F) into the holes. Wipe away the excess GLUE.
Now, fi ll the hole in the END (A) 1/4 to 1/2 full with GLUE.
å
Fasten the END (A) to the LEG (I). Tighten fi ve HIDDEN CAMS. Wipe away the
å
excess GLUE.
NOTE: Be sure the WOOD DOWEL in the LEG inserts into the hole in the END.
å
Now, fi ll the hole in the SIDE SKIRT (O) 1/4 to 1/2 full with GLUE (54M).
å
Fasten the SIDE SKIRT (O) to the LEG (I). Tighten the HIDDEN CAM. Wipe
å
away the excess GLUE.
NOTE: Be sure the WOOD DOWEL in the LEG inserts into the hole in the
å
SIDE SKIRT.
Last, fi ll the hole in the short edge of the SIDE SKIRT (O). Push a WOOD
å
DOWEL (15F) into the hole. Wipe away the excess GLUE.
15F
O
Surface with
HIDDEN CAMS
54M
i t h
e w
M S
f a c
C A
S u r
D E N
H I D
Edge with three CAM SCREWS
(3 used)
15F
A
I
1
2
Caution
!
Inspect the parts thoroughly before
assembling. Disassembly of glued
parts is extremely diffi cult.
Fill the holes 1/4 to 1/2 full with GLUE.
Edge with
FASTENERS
These surfaces
should be even.
Page 9