abc Storage Cabinet Manual page 19

Step 15
Carefully turn your unit over onto its front edges.
å
Unfold the BACK (F2) and lay it over your unit.
å
Make equal margins along the two short edges and along the two long
å
edges of the BACK (F2). Push on opposite corners of your unit if needed
to make it "square".
Fasten the BACK (F2) to your unit using the NAILS (1N).
å
NOTE: Be sure to tap NAILS into the holes that line up over
å
the UPRIGHT (C).
NOTE: Perforations have been provided for access through the BACK.
å
Carefully cut out the holes needed.
These holes must line up
over the UPRIGHT (C).
F2
Hey! It's starting to look
like something!
Caution
Do not stand the unit upright without the
BACK fastened. The unit may collapse.
1N
NAIL
(59 used in this step)
Page 19