abc Storage Cabinet Manual page 11

Step 7
First, fi ll the holes in the LEG (J) 1/4 to 1/2 full with GLUE (54M). Then, insert
å
two WOOD DOWELS (15F) into the holes. Wipe away the excess GLUE.
Now, fi ll the hole in the END (B) 1/4 to 1/2 full with GLUE.
å
Fasten the END (B) to the LEG (J). Tighten fi ve HIDDEN CAMS. Wipe away the
å
excess GLUE.
NOTE: Be sure the WOOD DOWEL in the LEG inserts into the hole in the END.
å
Now, fi ll the hole in the SIDE SKIRT (O) 1/4 to 1/2 full with GLUE (54M).
å
Fasten the SIDE SKIRT (O) to the LEG (J). Tighten the HIDDEN CAM. Wipe
å
away the excess GLUE.
NOTE: Be sure the WOOD DOWEL in the LEG inserts into the hole in the
å
SIDE SKIRT.
Last, fi ll the hole in the short edge of the SIDE SKIRT (O). Push a WOOD
å
DOWEL (15F) into the hole. Wipe away the excess GLUE.
Edge with
FASTENERS
These surfaces
should be even.
S u r
f a c
H I D
e w
D E N i t h
C A
M S
B
Edge with three CAM SCREWS
!
Inspect the parts thoroughly before
assembling. Disassembly of glued
parts is extremely diffi cult.
Fill the holes 1/4 to 1/2 full with GLUE.
54M
J
Caution
15F
O
Surface with
HIDDEN CAMS
15F
Page 11