abc Storage Cabinet Manual page 15

Step 11
Fasten two METAL BRACKETS (4G) to the BACK SKIRT (N2). Use two BLACK 9/16" LARGE HEAD SCREWS (1S).
å
NOTE: Be sure the BRACKETS are even with the edge of the BACK SKIRT.
å
Fill the holes in the BACK SKIRT (N2) 1/4 to 1/2 full with GLUE (54M). Then, insert two WOOD DOWELS (15F) into the
å
holes. Wipe away the excess GLUE.
Now, fi ll the hole in the LEFT REAR LEG (L) 1/4 to 1/2 full with GLUE. Then, insert the WOOD DOWEL in the BACK SKIRT
å
into this hole. Wipe away the excess GLUE.
NOTE: Be sure the CAM SCREWS in the LEG insert into the holes in the BACK SKIRT. Tighten these two HIDDEN CAMS
å
at this time.
Fasten the BACK SKIRT (N2) to the BOTTOM (E2). Use two BLACK 9/16" LARGE HEAD SCREWS (1S) through the METAL
å
BRACKETS on the BACK SKIRT and into the BOTTOM.
Caution
!
Inspect the parts thoroughly before
assembling. Disassembly of glued
parts is extremely diffi cult.
BLACK 9/16" LARGE HEAD SCREW
(4 used for the METAL BRACKETS)
54M
B
1S
N2
15F
L
4G
E2
N2
Edge without
METAL BRACKETS
Page 15