abc Storage Cabinet Manual page 13

Step 9
Fasten the BRACES (T) to the BOTTOM (E2). Use four
å
BROWN 1-1/2" FLAT HEAD SCREWS (14S).
Fasten the BOTTOM (E2) to the LEFT END (B). Tighten
å
two FASTENERS.
BROWN 1-1/2" FLAT HEAD SCREW
(4 used in this step)
These edges
must be even.
14S
T
T
E2
Dowel end
J
B
S u r
f a c
H I D
D E N
Do not stand the unit upright without the
BACK fastened. The unit may collapse.
How to use the
1. Insert the dowel end of the FASTENER into the
hole of the adjoining part.
NOTE: The dowel end of the FASTENER must
remain fully inserted in the hole of the adjoining
part while locking the FASTENER.
2. Tighten the FASTENER with a Phillips
screwdriver as tight as possible.
e w
i t h o
u t
C A
M S
Caution
FASTENER
This hole should be
closer to this edge.
E2
Surface with
FASTENERS
Page 13