Graco PerformAA 26B570 Instructions Manual page 25

Spray Tip Gasket Replacement
Replace the AXP or AXF spray tip gasket (9a) with a
compatible replacement part. See AXP and AXF Spray
Tip Gasket Assembly and Kits, page 33. Follow the
Reverse-A-Clean® (RAC) Spray Tip Setup, page 13
to replace RAC spray tip parts.
NOTE: Some AXP spray tip gaskets have a filter. See
Spray Tip Selection Charts, page 32.
1. Follow the Pressure Relief Procedure, page 14.
2. Separate the spray tip (9) from the gun. See Install
a Spray Tip and Air Cap, page 11.
3. Use a pick to remove the gasket (9a) from the spray
tip (9).
3A8553A
4. Press the replacement gasket (9a) into the spray tip
(9).
Gasket (9a)
with filter
9
F . 18: Spray tip gasket options
IG
5. Install the spray tip (9) and air cap (8). See Install a
Spray Tip and Air Cap, page 11.
Service
9a
9296
25