Assembly Of The Blender; Using The Blender - Cuisinart BFP703E Instructions Manual

2. HOW TO ASSEMBLE THE BLENDER
To use the blender, simply place the bowl on the motor unit in such a way
that the indicators marked on the bowl are facing you, with
the handle at the side. Now place the lid on the bowl and fit the
measuring cap into the lid. Plug the product in and switch on.
It is now ready for use.

3. USING THE BLENDER

1. Add the ingredients and place the lid on the bowl. It is also possible to
place the lid on first, then add the ingredients through the measuring
cap. Put the measuring cap back in place after all ingredients have
been added. Additional ingredients can also be added through the
measuring cap during the blending cycle.
Note: First add the liquid ingredients, then the solid ingredients. In this
way you will obtain a more homogeneous mixture and prevent
unnecessary stress on the motor.
2. STARTING THE BLENDING CYCLE: press the I touch-pad control. The red
light flashes to indicate that the blender is switched on.
3. SELECTING A BLENDING SPEED: press the speed touch-pad control you
have selected. The blender starts to operate. To change the speed,
simply press another touch-pad control. It is not necessary to switch
the appliance off.
4. MIXING TIME: take care not to overprocess the food. The results are
achieved in seconds, not minutes.
5. STOPPING THE BLENDING CYCLE: Press the touch-pad control already
selected. The machine stops. The control light flashes, indicating that it
is still switched on. To disconnect, press 0.
6. SEQ MODE: start SEQ-mode blending by pressing the I touch-pad
control, then the SEQ touch-pad control. The SEQ control light flashes.
Then press the touch-pad control of the speed desired and release it.
Repeat as many times as you wish. Each time you press the SEQ touch-pad
control, all control lights (position I, SEQ and selected speed) light up.
The SEQ mode is used to process greater amounts of food or to monitor
the texture of foodstuffs when you chop them. The SEQ feature is also
effective at the start of blending, or when you feed in foodstuffs which
only require low-key blending.
7. TO CRUSH ICE: Use the blender bowl only . To help you monitor the
process better, the "ice crush" feature functions like the SEQ mode.
Place the ice cubes in the blender bowl, insert the lid and press the I
touch-pad control. Then press the "ice crush" touch-pad control in
short sharp bursts until the ice has reached the desired consistency.
8 DETACHING WEDGED FOOD: use a spatula to remove the food wedged
around the chopping unit. ENSURE THE MACHINE IS SWITCHED OFF
AND UNPLUGGED BEFORE USING THE SPATULA. Afterwards, insert the
lid and continue the blending operation if necessary. Never turn on the
blender when the spatula is in the bowl.
9. AFTER BLENDING: Press the 0 touch-pad control to switch off, and
unplug the machine. Then remove the bowl from the motor unit by
lifting it off.
IMPORTANT
• Never place the blender bowl on the base, nor remove it while
the machine is running.
• Never pour boiling liquid food into the bowl or introduce frozen solid
food (with the exception of ice cubes or pieces of frozen fruit). Allow
ingredients to cool for at least 5 minutes before placing them in the
blender bowl.
• If you are blending hot liquids, remove the measuring cap (central
piece of the lid) to allow the steam to escape.
14