Table of Contents
Advertisement
Available languages
Available languages
V1.0
SPECIFIC SAFETY PRECAUTIONS
WARNING! DO NOT let comfort or familiarity with product (gained
from repeated use) replace strict adherence to the tool safety rules.
If you use this tool unsafely or incorrectly, you can suffer serious
personal injury.
1.
Use the correct tool for the job. This tool was designed for a
specific function. Do not modify or alter this tool or use it for an
unintended purpose.
2.
Do not use the tool if any parts are damage broken or misplaced.
Repair or replace the parts.
3.
Do not use any power tool with a malfunctioning power switch or
control. A power tool that fails to respond to the controls is dangerous
and can cause an injury. A qualified technician must repair and verify
the power tool is operating correctly before it can be used.
4.
Never use a tool with a cracked or worn tool accessory. Change
the tool accessory before using it.
5.
Never operate the tool when the safety guard is removed or
broken. Never clamp or tie the guard into the open position.
6.
Do not cover the air vents.
7.
Only use accessories that are specifically designed for use with the
tool. Ensure the accessory is tightly installed.
8.
Only use an accessory that exceeds the speed rating (see
Specifications).
9.
Disconnect the power source before installing or servicing the tool.
10. Remove adjusting keys and wrenches before using the tool. The
tool may eject an attached wrench or a key and cause an injury to
you or a bystander.
11. Before using the tool on a workpiece, test the tool by running it at
the highest speed rating for at least 30 seconds in a safe position.
Stop immediately if there is any abnormal vibration or wobbling.
Check the tool to determine the cause.
12. Never force the tool. Excessive pressure could break the tool,
resulting in damage to your workpiece or serious personal injury.
Excessive pressure is the cause if your tool runs smoothly under no
load, but roughly under load.
Visit www.princessauto.com for more information
3/8 in. Butterfly Air Impact Wrench
8843880
5
Advertisement
Table of Contents
