Calling And Sending/Receiving Text Messages; Using The Device Environmental Control - Jabbla Tellus 6 Operating Instructions Manual

Option
Dwell memory time
Show more dwell times
7. Choose OK.
2

Calling and sending/receiving text messages

Using the device you can make and receive calls send and receive text messages via a smartphone using Bluetooth.
TIP
For more information about setting up your device for calls and text messages in Mind Express, see the help function
for Mind Express via
3

Using the device environmental control

You can use the Tellus to control other devices such as a television, radio, lighting, sockets, etc. This can be done in two
ways:
•
Using the Jabbla-IR-protocol: the Tellus is equipped with an infrared receiver (6) and an infrared transmitter (24). This
enables you to control devices such as televisions, radios, DVD players using infrared codes. The Tellus can learn to
recognize the infrared codes of the devices.
Figure 2: Infrared receiver and transmitter
•
Using the Z-Wave-protocol. A Z-Wave controller is integrated into the Tellus, with which you can control lighting and
sockets.
TIP
For the use and settings of the infrared codes (Jabbla-IR) and for Z-Wave, see the help function for Mind Express via
Menu > Help.
E Control
2 Calling and sending/receiving text messages
Menu > Help.
Procedure
The dwell memory time is used in combination with dwell
selection. It is useful for users who struggle to stay on
a cell with their eyes for the entire dwell time. If a dwell
memory time is set, the dwell time is paused when the
user looks away from a target. When the user looks back
to the target before the dwell memory time expires, dwell
time will not restart from the beginning but will resume
from the pause.
Drag the slider to set the dwell memory time. You can
fine-tune the dwell memory time with
You can assign a different dwell time to various cells. For
example, you can use a shorter dwell time for cells with
1 letter and a longer dwell time for cells with sentences.
When editing a cell, Scanning/Dwelling allows you to link
the dwell time to the cell.
Choose Yes to show other dwell times, to set them with
the slider and if necessary to enable repeat dwell.
Tellus 6 / Tellus i6
and .
27