Pausing Eye Control (Tellus I6); Ending Eye Control Pause (Tellus I6); Checking The Battery Status - Jabbla Tellus 6 Operating Instructions Manual

Carry out one of the following actions to wake the device from sleep mode:
•
Press on the screen.
•
Press the on/off button (7).
•
Click a mouse button.
•
Press a key on the keyboard.
•
(Only for Tellus i6) Stare at the eye control camera until the device comes out of sleep mode.
See also
Putting the device into sleep mode
1.6

Pausing eye control (Tellus i6)

When Pause On Gaze is activated, you can temporarily interrupt the eye control yourself using eye control.
Look at the eye-tracking camera and wait a (configurable) time until you hear one beep. If you watch even longer, the
device may go into sleep mode if Sleep On Gaze is activated.
See also
Putting the device into sleep mode

Ending eye control pause (Tellus i6)

1.7 Ending eye control pause (Tellus i6)
Stare at the eye control camera until the device comes out of the eye control pause.
See also
Pausing eye control (Tellus i6)
1.8

Checking the battery status

You can check the battery level and status of the device in several ways:
C Getting started
1 Basic device functions
on page 10
on page 10
on page 11
on page 11
Tellus 6 / Tellus i6
11