Switching The Loudspeakers On Or Off; Setting The Volume Amplification Factor; Switching The Headphones On Or Off; Eye Control Pausing By Activating And Setting Up Gaze (Tellus I6) - Jabbla Tellus 6 Operating Instructions Manual

2

Switching the loudspeakers on or off

When the device is switched on, by default the speakers are on.
1. Tellus6 in the system tray in the Windows taskbar and select Options from the shortcut menu.
Right-click
Click on one of the following buttons next to Speakers:
2.
•
On, to switch on the speakers of the Tellus.
• Off, to switch off the speakers of the Tellus.
3. Click OK.
See also

Setting the volume amplification factor

3 Setting the volume amplification factor
You can additionally amplify the volume set in Windows.
1. Tellus6 in the system tray in the Windows taskbar and select Options from the shortcut menu.
Right-click
Slide the Speaker boost slider to the right to boost the volume. Slide the slider to the left to decrease the
2.
amplification. You can only lower the volume to the set Windows volume.
Click OK.
3.
See also
Switching the loudspeakers on or off
4

Switching the headphones on or off

When the device is switched on, by default the sound is sent to the headphones.
1.
Right-click Tellus6 in the system tray in the Windows taskbar and select Options from the shortcut menu.
2. Click on one of the following buttons next to Headphones:
•
On, to send the sound to the headphones.
•
Off, to NOT send the sound to the headphones.
Click OK.
3.
5

Eye control pausing by activating and setting up gaze (Tellus i6)

1.
Right-click Tellus6 in the system tray in the Windows taskbar and select Options from the shortcut menu.
Check the Pause On Gaze checkbox and use the slider to set the amount of time you have to stare at the eye control
2.
camera to pause the eye control.
At Wake On Gaze, set the time you have to stare at the eye control camera to end sleep mode and end the eye
3.
control pause.
6

Sleep mode activating and setting up with gaze (Tellus i6)

1. Tellus6 in the system tray in the Windows taskbar and select Options from the shortcut menu.
Right-click
2. Check the Sleep On Gaze checkbox and use the slider to set the amount of time you have to stare at the eye control
camera to activate sleep mode.
3. At Wake On Gaze, set the time you have to stare at the eye control camera to end sleep mode and end the eye
control pause.
F Settings
3 Setting the volume amplification factor
on page 29
on page 28
Tellus 6 / Tellus i6
29