E Control; Control Options; Touchscreen Control; Mouse Control - Jabbla Tellus 6 Operating Instructions Manual

E Control
1

Control options

1.1

Touchscreen control

The way to make a selection on the screen can be customized by the user. See Help in Mind Express.
NOTE
Check that the protective film has been removed from the device.
CAUTION
Do not use sharp tools, to prevent scratching the touch screen.
CAUTION
Make sure the touch screen does not come into contact with water.
Use the following techniques to operate the touch screen:
Action
Left-click
Double-click
Dragging
Right-click
1.2

Mouse control

The device can be operated with a mouse. The device has a USB-A and a USB-C port to which you can connect a USB-
compatible mouse. You can also connect a mouse via Bluetooth.
TIP
For more information on activating and setting up the mouse control in Mind Express, see the Mind Express Help
function, via Menu >
1.3

Scanning control

E Control
1 Control options
Technique
Tap once on the object with your finger.
Give two short, quick taps on the object with your finger.
To move a (draggable) object, touch the object and drag it
to the desired location.
•
•
See
28.
Help.
Touch the object and its position stays fixed. Then
release the object to generate the right click.
Press the Escape button on the rear side and then
touch the object. After selecting, the left mouse button
is active again. This does not work if the Up button is
disabled.
Setting the buttons on the back of the device
Tellus 6 / Tellus i6
on page
21