Messages And Abbreviations - Jabbla Allora Manual

Messages and abbreviations

Allora allows you to store standard messages in its memory and to link them
with a key or a combination of Fn and a key or a combination of Shift and a
key. You can store up to 111 messages, each of them having a maximum of
1000 characters. Besides that, Allora is able to learn abbreviations and
automatically expand them.
Storing a message under a key
First type the message. Then press the Message key twice. Choose the
character or figure you want to link the message with. Finally confirm your
choice by pressing the Message key again. Allora produces a short auditory
sound to acknowledge the choice.
In case you chose the wrong character or figure press the CLR key and
restart the procedure.
To link a message to a combination of Fn and/or Shift + a character or a
figure you use the same procedure:
First write the message, and then press the Message key twice. Now press
successively the Fn key (and/or Shift key) followed by a character or a figure
and confirm with the Message key. You do not have to hold the Fn key or
Shift key in this procedure.
You can always replace a specific message linked with a character of figure
or combination of the Fn key (or Shift key) and a character or a figure. Just
follow the same procedure as explained above. To remove a message from a
key or key combination just write an empty message (for instance one space)
and link it with the key or key combination.
Recall a message
Recalling a message is easy. Press the Message key once and then the
character or the figure (or combination of the Fn key and/or Shift key with the
character or the figure) the message is linked with. Allora will now show the
message on the display. Complete the message if necessary or just press
the Enter key to have it pronounced.
Allora 25
V1.0.1.1. 14-07-2006