Starting Up The Device; Shutting Down The Device - Jabbla Tellus 6 Operating Instructions Manual

No. Identification
13 Connection to power supply
14 Jack for headphones
15 USB-3.2 GEN 1-port
16 Tray stand
17 Integrated mounting system
18 USB C port
19 Switch 1 connection
20 Switch 2 connection
21 Speakers
22 Cooling fins
23 Second screen
24 Infrared transmitter
25 Rear camera
1.2

Starting up the device

Press the on/off button (7) on the device to switch on the device.
The device will start up Windows and then Mind Express.
If the device was in sleep mode (on/off indicator flashing slowly), the device will be ready for use again within a second.
See also

Shutting down the device

Resetting the device on page 33
C Getting started
1 Basic device functions
on page 9
Explanation
This connection is to charge the device using the
power adapter included.
This output is for connecting headphones to the
device. The speakers are not automatically disabled
when you connect the headphones. Headphones and
speakers are controlled through the software.
The USB port enables you to connect USB-compatible
devices and peripherals such as a mouse, keyboard,
printer, ...
The device has a folding stand. The stand is designed
so that the device can be ergonomically supported
on a tray.
For mounting with DAESSY and REHADAPT systems.
The USB port enables you to connect USB-compatible
devices and peripherals such as a mouse, keyboard,
printer, ... You cannot charge the device through this
port.
This input is for connecting switch 1.
This input is for connecting switch 2.
The device has 4 powerful loudspeakers.
For heat dissipation. Do not cover the cooling fins.
This displays the message the user is speaking. This
function can be disabled by the user.
This enables infrared signals to be broadcast, for
example to control a television.
The device is equipped with a TiltCam at the back.
The TiltCam is controlled by Mind Express and
includes zoom, tilt and pan functions.
Tellus 6 / Tellus i6
9