Environmental Control - Jabbla Allora Manual

Environmental control

Allora can optionally be equipped with a programmable infrared remote
control module (Gewa linked). This module is capable to learn and transmit
infrared codes. That allows you use Allora to control for instance your
television, radio...
You can - similar to linking sounds or messages with characters or figures -
link a infrared remote control command with a character, a figure or a
combination of the Fn (and/or Shift) key with a character or a figure. First
press the key Triangle and then the character or figure the infrared command
is linked with.
Programming infrared remote control commands
Suppose you want to program the command to increase the volume on your
television:
•
First press the Triangle key on the Allora twice.
•
Press the character or the figure (or a combination of Fn and/or Shift
with a character or a figure) you want to link the remote control
command with.
•
Give a figure from 1 to 9 to add the number of times the infrared
remote control command has to be repeated when send.
•
Confirm your choice by pressing the Triangle key again.
•
After the confirmation a red light in the infrared window on the Allora
will turn on. Allora is now ready to learn the specific infrared code to -
in our example - increase the volume of your television.
Allora
V1.0.1.1. 14-07-2006
37