GMC MS018 Manual page 7

General Safety Instructions
WARNING! When using electric power tools, basic safety precautions should
always be followed to reduce the risk of fire, electric shock and personal
injury including the following safety information. Read all these instructions
before attempting to operate this product and save these instructions for
future use.
WARNING: This appliance is not intended for use by persons (including
children) with reduced, physical or mental capabilities or lack of experience
or knowledge unless they have been given supervision or instruction
concerning use of the appliance by a person responsible for their safety.
Children must be supervised to ensure that they do not play with the
appliance.
CAUTION: Use the power tool, accessories and tool bits etc. in accordance
with these instructions, taking into account the working conditions and the
work to be performed. Use of the power tool for operations different from
those intended could result in a hazardous situation.
The term "power tool" in the warnings refers to your mains-operated (corded)
power tool or battery-operated (cordless) power tool.
1. Keep work area clear - Cluttered areas and benches invite injuries.
2. Consider work area environment
• Do not expose tools to rain.
• Do not use tools in damp or wet locations.
• Keep work area well lit.
• Do not use tools in the presence of flammable liquids or gases.
3. Guard against electric shock - Avoid body contact with earthed or
grounded surfaces (e.g. pipes, radiators, ranges, refrigerators).
4. Keep other persons away - Do not let persons, especially children,
not involved in the work touch the tool or the extension cord and keep them
away from the work area.
5. Store idle tools - When not in use, tools should be stored in a dry locked-
up place, out of reach of children.
6. Do not force the tool - It will perform the job better and safer at the rate
for which it was intended.
7. Use the right tool - Do not force small tools to do the job of a heavy duty
tool. Do not use tools for purposes not intended; for example do not use
circular saws to cut tree limbs or logs.
8. Dress appropriately
• Do not wear loose clothing or jewelry, which can be
caught in moving parts.
• Suitable safety footwear is recommended when working outdoors.
• Wear protective covering to contain long hair.
9. Use protective equipment
• Use safety glasses.
• Use face or dust mask if working operations create dust
WARNING: Not using protective equipment or appropriate clothing can cause
personal injury or increase the severity of an injury.
10. Connect dust extraction equipment - If the tool is provided for the
connection of dust extraction and collecting equipment, ensure these are
connected and properly used.
11. Do not abuse the power cable - Never yank the power cable to
disconnect it from the socket. Keep the power cable away from heat,
oil and sharp edges. Damaged or entangled power cables increase the
risk of electric shock.
12. Secure work - Where possible use clamps or a vice to hold the work. It is
safer than using your hand.
13. Do not overreach - Keep proper footing and balance at all times.
14. Maintain tools with care
• Keep cutting tools sharp and clean makes the tool easier to control and
less likely to bind or lock in the workpiece.
• Follow instruction for lubricating and changing accessories.
• Inspect tool power cables periodically and if damaged have them
repaired by an authorised service facility.
• Inspect extension cables periodically and replace if damaged.
• Keep handles dry, clean and free from oil and grease.
WARNING: Many accidents are caused by poorly maintained power tools.
15. Disconnect tools - When not in use, before servicing and when changing
accessories such as blades, bits and cutters, disconnect tools from the
power supply.
WARNING: The use of accessories or attachments not recommended by the
manufacturer may result in a risk of injury to persons.
16. Remove adjusting keys and wrenches - Form the habit of checking to
see that keys and adjusting wrenches are removed from the tool before
switching it on.
17. Avoid unintentional starting - Ensure switch is in "off' position when
connecting to a mains socket or inserting a battery pack, or when picking
up or carrying the tool.
WARNING: Unintended starting of a tool can cause major injuries.
18. Use outdoor extension leads - When the tool is used outdoors, use
only extension cords intended for outdoor use and so marked. Use of an
extension cable suitable for outdoor use reduces the risk of electric shock.
19. Stay alert
• Watch what you are doing, use common sense and do not operate the
tool when you are tired.
• Do not use a power tool while you are under the influence of drugs,
alcohol or medication.
WARNING: A moment of inattention while operating power tools may result in
serious personal injury.
20. Check damaged parts
• Before further use of tool, it should be carefully checked to determine
that it will operate properly and perform its intended function.
• Check for alignment of moving parts, binding of moving parts, breakage
of parts, mounting and any other conditions that may affect its
operation.
• A guard or other part that is damaged should be properly repaired or
replaced by an authorised service centre unless otherwise indicated in
this instruction manual.
• Have defective switches replaced by an authorised service centre.
7
GB