Single port Multiprotocol Fast Ethernet Print Server Hardware User
This indicator blinks (goes off briefly) when the Print Server is
transmitting to the network.
♦ Lk/Rx
Steady or flashing green confirms that the Print Server has a good
connection to the network.
This indicator blinks (goes off briefly) when the Print Server is
receiving from the network.
♦ LPT
This indicator shows steady green whenever the Print Server is
transferring print data through its printer port.
Back
The back section of the Print Server consists entirely of the device
printer port.
Printer Port
The printer port can be configured using the PS Admin program, or by
commands issued to the Print Server via Telnet. See the PS Admin
Program User
4
Back End
Guide for configuration procedures.
Guide
Introduction